Cleaning mould should be easy and SAN-AIR Surface Mould Remover makes sure that removing any visible mould you have and ensuring that it stays gone is a simple matter.
Features
Immediate visible mould removal
Long-lasting
Scientifically tested
Environmentally friendly and Exceptionally safe to use
Ready to use, easy to apply
SAN-AIR has been independently tested and confirmed to remove 99.99% of Surface mould and Bacteria.
SAN-AIR protects the cleaned surface for up to 12 months. Keeping you and your family safe from any mould or bacteria contamination.
Eliminates 99.99% of mould, mould spores & bacteria on contact
Plant based actives. Don’t risk damaging your health or property using nasty chemical options
Keep mould out – provides up to 12 months protection from new growth
Stop your mould triggered respiratory flare-ups, hay fever & allergies
Safe for use around babies, children, pregnant women, pets
Can also be used with our Nano Atomizer for fogging areas
100% Natural Actives, Subtle Scent, Contains Alcohol
Non-Allergenic
SAN-AIRtm Surface Mould Remover thoroughly cleans any surface of mould without any toxic chemicals.
Simply spray onto any surface leave 15 minutes then wipe away.
SET UP
Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first.(Note it is normal to see the surface lighter in colour while wet).
CLEAN
Spray to coat mould evenly, wait 15 minutes and wipe the mould off with a clean dry cloth.
Ensure that dirty clothes are not reused as you will spread the mould. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.
Repeat step 2 until all mould has been removed.
FINISH
Use a final spray with a fine mist and allow to air dry, leaving a fine mould prevention coating.
SAN-AIR™ proprietary essential oils, Isoproply alcohol, purified water.
Made in Australia with Australian ingredients.
Cleaning mould should be easy and SAN-AIR Surface Mould Remover makes sure that removing any visible mould you have and ensuring that it stays gone is a simple matter.
Features
Immediate visible mould removal
Long-lasting
Scientifically tested
Environmentally friendly and Exceptionally safe to use
Ready to use, easy to apply
SAN-AIR has been independently tested and confirmed to remove 99.99% of Surface mould and Bacteria.
SAN-AIR protects the cleaned surface for up to 12 months. Keeping you and your family safe from any mould or bacteria contamination.
Eliminates 99.99% of mould, mould spores & bacteria on contact
Plant based actives. Don’t risk damaging your health or property using nasty chemical options
Keep mould out – provides up to 12 months protection from new growth
Stop your mould triggered respiratory flare-ups, hay fever & allergies
Safe for use around babies, children, pregnant women, pets
Can also be used with our Nano Atomizer for fogging areas
100% Natural Actives, Subtle Scent, Contains Alcohol
Non-Allergenic
SAN-AIRtm Surface Mould Remover thoroughly cleans any surface of mould without any toxic chemicals.
Simply spray onto any surface leave 15 minutes then wipe away.
SET UP
Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first.(Note it is normal to see the surface lighter in colour while wet).
CLEAN
Spray to coat mould evenly, wait 15 minutes and wipe the mould off with a clean dry cloth.
Ensure that dirty clothes are not reused as you will spread the mould. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.
Repeat step 2 until all mould has been removed.
FINISH
Use a final spray with a fine mist and allow to air dry, leaving a fine mould prevention coating.
SAN-AIR™ proprietary essential oils, Isoproply alcohol, purified water.
Made in Australia with Australian ingredients.